Modified engineering plastics · Formulation development, sampling & worldwide export
IATF 16949 · ISO 14001 · Testing on requestFree samplingWorldwide export24h reply
+86 532 6896 5111 wg@cplastics.com.cn

Modified PP CP111

Modified PP CP111. Tensile strength 28 MPa, Notched impact 160 J/m. MOQ 500 kg.

CP111PP Modified PolypropyleneQingdao plant
Modified PP CP111
Grade
CP111
Family
PP Modified Polypropylene
Form
Pellets, 25 kg bags
MOQ
500 kg
Color
Natural · matched to your color standard
Customisation
Color and properties adjusted to your requirements
Download TDS (PDF)Chinese version

Typical Properties (TDS)

Values are typical and measured under standard ISO methods; refer to the lot COA for release data.
PropertyUnitTypical value
Density (23℃)g/cm³0.9
Mould shrinkage (23℃)%1.4-1.6
MFR (230℃/2.16kg)g/10min1.5
Tensile strength (50mm/min)MPa28
Flexural strength (2.0mm/min)MPa28
Flexural modulus (2.0mm/min)MPa950
Notched impact strength (23℃)J/m160
HDT (0.45MPa)°C90
Flammability (3.0)—HB
Typical value ranges are for grade screening and preliminary comparison. Purchases are governed by the agreed technical specification or sealed reference sample, with a COA shipped on every lot.

Recommended Processing

ParameterRecommended
Drying—
Rear zone temperature—
Middle zone temperature—
Front zone temperature—
Nozzle temperature—
Melt temperature—
Mould temperature—

Typical Applications

  • Precision electronics housings
  • Explosion-protected parts
  • Instrument cases

Other Grades in This Family

Need the full data sheet and a quote for CP111?

Tell us the wall thickness, service temperature and volume, and we will come back within 24 hours with a technical recommendation and pricing.

FAQ

Can Modified PP CP111 replace the grade we are using now?

Yes. Send us the incumbent grade and the critical values (tensile strength, impact at −30 °C, shrinkage, colour) and we match the formulation to those targets. Most customers validate with a 5–25 kg sample before switching production.

Why can two compounds with the same grade name differ by 15% in strength?

Fibre length retention and the coupling system. We control shear on twin-screw lines and test every lot for MFR, ash, tensile and impact; each lot ships with a COA for traceability.

What are the typical properties of Modified PP CP111?
Typical properties of Modified PP CP111 (ISO test methods; indicative values — certified results in the batch COA):Density 0.9 g/cm³; Mould shrinkage 1.4-1.6 %; MFR 1.5 g/10min; Tensile strength 28 MPa; Flexural strength 28 MPa; Flexural modulus 950 MPa; Notched impact strength 160 J/m; HDT 90 °C; Flammability HB
What injection moulding conditions are recommended for Modified PP CP111?
Recommended processing conditions for Modified PP CP111:Drying —; Rear zone temperature —; Middle zone temperature —; Front zone temperature —; Nozzle temperature —; Melt temperature —; Mould temperature —
What is Modified PP CP111 typically used for?
Modified PP CP111 is typically used in:Precision electronics housings, Explosion-protected parts, Instrument cases
What is the minimum order quantity for Modified PP CP111?
Minimum order quantity is 500 kg for standard grades and 1 tonne for newly developed custom formulations.
Can Modified PP CP111 be tailored to specific performance targets?
Yes. Qingdao Yunsu adjusts formulations to the target requirements, including glass fibre loading, flame-retardant class, UV and weathering resistance, antistatic or conductive properties and colour, and supports dedicated grade development.
How long do sampling and mass production take?
Sampling takes 3-7 days for existing grades and 7-15 days for new formulations; mass production runs 10-20 days after sample approval, shipping from Qingdao Port.
Can the color and properties be customized to our requirements?
Yes. Colours can be matched to your colour standard. Give us the working conditions, performance targets and cost ceiling — we design the formulation backwards from there. Most customers validate with a 5–25 kg sample before series production.
Call Email