Modified engineering plastics · Formulation development, sampling & worldwide export
IATF 16949 · ISO 14001 · Testing on requestFree samplingWorldwide export24h reply
+86 532 6896 5111 wg@cplastics.com.cn

Reinforced PC HF-1031GF30

Reinforced PC HF-1031GF30. Tensile strength 110 MPa, Notched impact 170 J/m. MOQ 500 kg.

HF-1031GF30PC Modified PolycarbonateQingdao plant
Reinforced PC HF-1031GF30
Grade
HF-1031GF30
Family
PC Modified Polycarbonate
Form
Pellets, 25 kg bags
MOQ
500 kg
Color
Natural · matched to your color standard
Customisation
Color and properties adjusted to your requirements
Download TDS (PDF)Chinese version

Typical Properties (TDS)

Values are typical and measured under standard ISO methods; refer to the lot COA for release data.
PropertyUnitTypical value
Density (23℃)g/cm³1.43
Mould shrinkage (23℃)%0.2-0.4
MFR (300℃/1.2kg)g/10min15
Tensile strength (50mm/min)MPa110
Elongation at break (50mm/min)%5
Flexural strength (2.0mm/min)MPa152
Flexural modulus (2.0mm/min)MPa6431
Notched impact strength (23℃)J/m170
HDT (1.82MPa)°C145
Flammability (1.5mm)—HB
Typical value ranges are for grade screening and preliminary comparison. Purchases are governed by the agreed technical specification or sealed reference sample, with a COA shipped on every lot.

Recommended Processing

ParameterRecommended
Drying90℃-110℃, 2.0-4.0h
Rear zone temperature220℃-250℃
Middle zone temperature230℃-290℃
Front zone temperature260℃-300℃
Nozzle temperature270℃-300℃
Melt temperature250℃-280℃
Mould temperature90℃-120℃

Typical Applications

  • Precision electronics housings
  • Explosion-protected parts
  • Instrument cases

Other Grades in This Family

Need the full data sheet and a quote for HF-1031GF30?

Tell us the wall thickness, service temperature and volume, and we will come back within 24 hours with a technical recommendation and pricing.

FAQ

Can Reinforced PC HF-1031GF30 replace the grade we are using now?

Yes. Send us the incumbent grade and the critical values (tensile strength, impact at −30 °C, shrinkage, colour) and we match the formulation to those targets. Most customers validate with a 5–25 kg sample before switching production.

Why can two compounds with the same grade name differ by 15% in strength?

Fibre length retention and the coupling system. We control shear on twin-screw lines and test every lot for MFR, ash, tensile and impact; each lot ships with a COA for traceability.

What are the typical properties of Reinforced PC HF-1031GF30?
Typical properties of Reinforced PC HF-1031GF30 (ISO test methods; indicative values — certified results in the batch COA):Density 1.43 g/cm³; Mould shrinkage 0.2-0.4 %; MFR 15 g/10min; Tensile strength 110 MPa; Elongation at break 5 %; Flexural strength 152 MPa; Flexural modulus 6431 MPa; Notched impact strength 170 J/m; HDT 145 °C; Flammability HB
What injection moulding conditions are recommended for Reinforced PC HF-1031GF30?
Recommended processing conditions for Reinforced PC HF-1031GF30:Drying 90℃-110℃, 2.0-4.0h; Rear zone temperature 220℃-250℃; Middle zone temperature 230℃-290℃; Front zone temperature 260℃-300℃; Nozzle temperature 270℃-300℃; Melt temperature 250℃-280℃; Mould temperature 90℃-120℃
What is Reinforced PC HF-1031GF30 typically used for?
Reinforced PC HF-1031GF30 is typically used in:Precision electronics housings, Explosion-protected parts, Instrument cases
What is the minimum order quantity for Reinforced PC HF-1031GF30?
Minimum order quantity is 500 kg for standard grades and 1 tonne for newly developed custom formulations.
Can Reinforced PC HF-1031GF30 be tailored to specific performance targets?
Yes. Qingdao Yunsu adjusts formulations to the target requirements, including glass fibre loading, flame-retardant class, UV and weathering resistance, antistatic or conductive properties and colour, and supports dedicated grade development.
How long do sampling and mass production take?
Sampling takes 3-7 days for existing grades and 7-15 days for new formulations; mass production runs 10-20 days after sample approval, shipping from Qingdao Port.
Can the color and properties be customized to our requirements?
Yes. Colours can be matched to your colour standard. Give us the working conditions, performance targets and cost ceiling — we design the formulation backwards from there. Most customers validate with a 5–25 kg sample before series production.
Call Email