Modified engineering plastics · Formulation development, sampling & worldwide export
IATF 16949 · ISO 14001 · Testing on requestFree samplingWorldwide export24h reply
+86 532 6896 5111 wg@cplastics.com.cn

Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15

Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15. Tensile strength 62 MPa, Notched impact 55 J/m. MOQ 500 kg.

HF-1214M15PC/ABS Alloy SeriesQingdao plant
Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15
Grade
HF-1214M15
Family
PC/ABS Alloy Series
Form
Pellets, 25 kg bags
MOQ
500 kg
Color
Natural · matched to your color standard
Customisation
Color and properties adjusted to your requirements
Download TDS (PDF)Chinese version

Typical Properties (TDS)

Values are typical and measured under standard ISO methods; refer to the lot COA for release data.
PropertyUnitTypical value
Density (23℃)g/cm³1.30
Mould shrinkage (23℃)%0.15-0.4
MFR (260℃/2.16kg)g/10min20
Tensile strength (50mm/min)MPa62
Elongation at break (50mm/min)%5
Flexural strength (2.0mm/min)MPa103
Flexural modulus (2.0mm/min)MPa4600
Notched impact strength (23℃)J/m55
HDT (1.82MPa)°C84
Flammability (1.5mm)—V0
Typical value ranges are for grade screening and preliminary comparison. Purchases are governed by the agreed technical specification or sealed reference sample, with a COA shipped on every lot.

Recommended Processing

ParameterRecommended
Drying80-90℃, 4.0h
Rear zone temperature220℃-240℃
Middle zone temperature240℃-250℃
Front zone temperature240℃-260℃
Nozzle temperature240℃-260℃
Melt temperature220℃-250℃
Mould temperature80℃-90℃

Typical Applications

  • Precision electronics housings
  • Explosion-protected parts
  • Instrument cases

Other Grades in This Family

Need the full data sheet and a quote for HF-1214M15?

Tell us the wall thickness, service temperature and volume, and we will come back within 24 hours with a technical recommendation and pricing.

FAQ

Can Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15 replace the grade we are using now?

Yes. Send us the incumbent grade and the critical values (tensile strength, impact at −30 °C, shrinkage, colour) and we match the formulation to those targets. Most customers validate with a 5–25 kg sample before switching production.

Why can two compounds with the same grade name differ by 15% in strength?

Fibre length retention and the coupling system. We control shear on twin-screw lines and test every lot for MFR, ash, tensile and impact; each lot ships with a COA for traceability.

What are the typical properties of Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15?
Typical properties of Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15 (ISO test methods; indicative values — certified results in the batch COA):Density 1.30 g/cm³; Mould shrinkage 0.15-0.4 %; MFR 20 g/10min; Tensile strength 62 MPa; Elongation at break 5 %; Flexural strength 103 MPa; Flexural modulus 4600 MPa; Notched impact strength 55 J/m; HDT 84 °C; Flammability V0
What injection moulding conditions are recommended for Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15?
Recommended processing conditions for Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15:Drying 80-90℃, 4.0h; Rear zone temperature 220℃-240℃; Middle zone temperature 240℃-250℃; Front zone temperature 240℃-260℃; Nozzle temperature 240℃-260℃; Melt temperature 220℃-250℃; Mould temperature 80℃-90℃
What is Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15 typically used for?
Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15 is typically used in:Precision electronics housings, Explosion-protected parts, Instrument cases
What is the minimum order quantity for Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15?
Minimum order quantity is 500 kg for standard grades and 1 tonne for newly developed custom formulations.
Can Halogen-free Flame Retardant PC/ABS Alloy HF-1214M15 be tailored to specific performance targets?
Yes. Qingdao Yunsu adjusts formulations to the target requirements, including glass fibre loading, flame-retardant class, UV and weathering resistance, antistatic or conductive properties and colour, and supports dedicated grade development.
How long do sampling and mass production take?
Sampling takes 3-7 days for existing grades and 7-15 days for new formulations; mass production runs 10-20 days after sample approval, shipping from Qingdao Port.
Can the color and properties be customized to our requirements?
Yes. Colours can be matched to your colour standard. Give us the working conditions, performance targets and cost ceiling — we design the formulation backwards from there. Most customers validate with a 5–25 kg sample before series production.
Call Email