
Reinforced Toughened PA6 RF-1332GF30
Tensile strength 120 MPa, Notched impact strength 29 kJ/m².
Request Data Sheet & Quote →Reinforced Toughened PA6 RF-1332GF25. Tensile strength 125 MPa, Notched impact 290 J/m. MOQ 500 kg.

| Property | Unit | Typical value |
|---|---|---|
| Density (23℃) | g/cm³ | 1.28 |
| Mould shrinkage (23℃) | % | 0.4-0.6 |
| Tensile strength (5mm/min) | MPa | 125 |
| Elongation at break (5mm/min) | % | 4 |
| Flexural strength (2mm/min) | MPa | 180 |
| Flexural modulus (2mm/min) | MPa | 5500 |
| Notched impact strength (23℃) | J/m | 290 |
| Notched impact (23℃) | J/m | 1240 |
| HDT (1.82MPa) | °C | 190 |
| Flammability (23℃) | — | HB |
| Parameter | Recommended |
|---|---|
| Drying | 80℃-100℃, 4-6h |
| Rear zone temperature | 220℃-240℃ |
| Middle zone temperature | 220℃-240℃ |
| Front zone temperature | 230℃-250℃ |
| Nozzle temperature | 230℃-250℃ |
| Melt temperature | 220℃-240℃ |
| Mould temperature | 80℃-100℃ |

Tensile strength 120 MPa, Notched impact strength 29 kJ/m².
Request Data Sheet & Quote →
Tensile strength 52 MPa, Notched impact strength 60 J/m.
Request Data Sheet & Quote →
Tensile strength 110 MPa, Notched impact strength 10.5 kJ/m².
Request Data Sheet & Quote →
Tensile strength 93 MPa, Notched impact strength 120 J/m.
Request Data Sheet & Quote →Tell us the wall thickness, service temperature and volume, and we will come back within 24 hours with a technical recommendation and pricing.
Yes. Send us the incumbent grade and the critical values (tensile strength, impact at −30 °C, shrinkage, colour) and we match the formulation to those targets. Most customers validate with a 5–25 kg sample before switching production.
Fibre length retention and the coupling system. We control shear on twin-screw lines and test every lot for MFR, ash, tensile and impact; each lot ships with a COA for traceability.