What Is PP-TD20? Mineral-Filled Polypropylene Explained
TD stands for talc and 20 for 20% loading. Mineral filling brings polypropylene stiffness, heat resistance and dimensional stability.
2026-07-21
Archived
The original article has been retired. If you arrived from search, here is the selection content worth reading instead.
This page has been archived
The article formerly published at this address has been retired. The URL is kept live and filed under Product Gallery.
If you came here to source material, send us wall thickness, service temperature, flame requirements and monthly volume — we reply within 24 hours with technical advice and pricing.
Recommended Reading
PP Foam Extrusion: Why Foaming PP Is Harder Than PE or PS
High crystallinity and low melt strength give PP a very narrow foaming window; raising melt strength is the key.
2026-07-21
What Is PC/ABS Alloy, and When Should You Choose It Over PC or ABS?
PC/ABS blends the impact strength and heat resistance of PC with the flow and cost profile of ABS. Understanding the trade-offs prevents costly material mistakes.
2026-07-20
PP-TD20 Pricing and Data Sheets: What to Include in an Enquiry
A complete enquiry compresses quotation turnaround from five rounds to one — and avoids discovering non-compliance after sampling.
2026-07-19
PC/ABS Drying: Temperatures, Times and the Mistakes That Cost You Parts
90 °C or 110 °C? Two hours or four? Under-drying PC/ABS is the single most common root cause of silver streaking and brittle failures.
2026-07-18
PP-TD20 Density Versus Alternative Materials: Buying per Kg or per Piece
PP has the lowest density, amplifying its price advantage per kilogram — provided the part survives.
2026-07-18
Key Grades
PA6-GF30
Reinforced Nylon PA6 GF30 (Gold)
30% glass fibre reinforced with a balance of high stiffness and impact strength, for load-bearing parts and power tool housings.
Request Data Sheet & Quote →
PA6-GF30 HI
High-Impact Reinforced Nylon PA6 GF30 (Green)
Glass fibre reinforced and impact modified, retaining impact strength at low temperature for power tools, garden equipment and industrial housings.
Request Data Sheet & Quote →
PA6-GF25 HI
Reinforced & Toughened Nylon PA6
Glass fibre reinforcement combined with elastomer toughening, balancing stiffness and impact for drop-tested and shock-loaded parts.
Request Data Sheet & Quote →
PP+EPDM-T20
PP+EPDM-T20 Impact Modified Polypropylene (YS269 Light Grey)
EPDM toughened with talc filling for excellent low-temperature impact, used for bumpers, exterior trim and outdoor products.
Request Data Sheet & Quote →Tell us which part you are making
Describe the duty cycle and we will come back with candidate grades, processing windows and pricing.